New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows San Jose pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Door Installation: The San Jose Owner’s Guide
We stock and install Mr-Glass-compatible door hardware and replacement parts throughout San Jose, with most door installation work running $220 – $680 depending on the part and how much of the frame has to come apart. Most owners call us after a door starts dragging on the track, a latch stops catching cleanly, or a roller grinds loud enough to hear from the next room. If you’ve got a Mr-Glass door that worked fine for years and recently turned temperamental, you’re in the right place, and this page will tell you what it costs, what we keep on the truck, and whether it’s a job you should even attempt yourself.
Key Takeaways
- Mr-Glass door installation in San Jose typically runs $220 – $680 installed, depending on the part and frame condition.
- We’re an independent San Jose installer, not a Mr-Glass affiliate, which means we fix the door without pushing you into a full replacement.
- The most common Mr-Glass door failures we see are roller wear, track misalignment, and latch/frame fatigue from settling.
- We stock common Mr-Glass-compatible rollers, hinges, and strike plates on the truck, and we can source the rest quickly.
- Every job gets a written price before we start. You’ll know the number before we touch the door.
Which Mr-Glass Models This Applies To
Most Mr-Glass doors in San Jose fall into one of two categories: sliding patio doors and hinged swing doors with glass inserts. The sliding models use adjustable steel rollers in the bottom rail, and the biggest compatibility gotcha is wheel diameter, which varies between Mr-Glass’s 300 series (smaller 1¼-inch wheels) and the heavy-duty 500 series (1½-inch wheels with a wider track profile). If you install the smaller wheel on a 500 series door, the door will roll but sit too low, and the strike plate won’t line up. Hinged Mr-Glass doors are more forgiving on hardware, but the hinge setback (the measurement from the door edge to the hinge barrel) has to match, and we’ve seen enough mismatched hinge mortises in Cambrian Park and Willow Glen to know it’s not a job for guesswork.
We recommend OEM Mr-Glass parts when the door is less than about ten years old and still under any kind of manufacturer coverage, because the wheel profile and finish will match exactly. For older Mr-Glass doors where OEM parts are discontinued, a quality aftermarket roller with the same wheel diameter and a sealed bearing will usually last longer than the original. If you’re not sure which series you have, pull the door panel and look for a small paper label on the top rail, or measure the wheel diameter with the door off the track. Either way, we can identify it on site.
Signs Your Mr-Glass Door Installation Is Failing
- The door takes real muscle to slide. When the rollers get worn or the bearings seize up, the panel drags instead of gliding. We see this most often in households near the Alum Rock foothills where fine grit works its way into the track over the dry season.
- You hear a metallic grinding or clicking when the door moves. That’s usually a roller bearing coming apart inside the wheel. If you keep running it, the wheel can flatten and carve a groove into the aluminum track.
- The latch doesn’t line up with the strike plate anymore. San Jose’s clay soils expand and contract with the seasons, and a door that used to latch with a thumb press can drift out of alignment as the foundation settles. It’s rarely the latch’s fault, it’s the door’s position.
- You see daylight or feel a draft at the top or bottom corner. The weatherstripping on a Mr-Glass door compresses over time, and once it flattens, air moves through. This is also the point where energy loss becomes measurable on a PG&E bill.
- The door rattles in the frame when it’s closed. That’s usually worn-out hinge pins on a swing door or collapsed rollers on a slider. A door that rattles is also a door that’s slowly damaging its own frame.
Replacement Cost & What’s Included
Here’s what Mr-Glass door installation work runs in San Jose, parts and labor included:
| Job | Typical Installed Price |
|---|---|
| Sliding door roller replacement (both rollers) | $220 – $340 |
| Track repair or realignment | $180 – $400 |
| Hinged door hinge replacement (3 hinges) | $190 – $280 |
| Latch, strike plate, and weatherstrip refresh | $140 – $260 |
| Full door realignment (slider or swing door) | $280 – $680 |
The range depends on how far out of spec the door has drifted and whether the frame itself needs shimming or repair. On every job, we give you a written line-item price before we start, so the number you agree to is the number you pay. If a repair fails within our 365-Day Done Right Promise, we come back at no charge. No revised invoice at the door, no upsell to a full door replacement unless you actually need one.
DIY or Call Us?
You can safely do a few things without tools: clean the track with a dry cloth, check the visible screws for looseness, and inspect the weatherstripping for flattening or tears. That’s about where we’d tell a homeowner to stop on a Mr-Glass door. Roller replacement and hinge work require lifting the panel, and a glass-filled slider can weigh 80 to 150 pounds. If the panel slips off the track while you’re working on it, you’re dealing with broken glass or a crushed toe. And the temptation to force a misaligned door back into place usually makes the original problem worse. If you’ve got a San Jose Mr-Glass door that’s fighting you, call (669) 333-7786 and we’ll give you a written estimate before anything gets pulled apart.
FAQs
In our experience, Mr-Glass door rollers and hinges last 8 to 15 years in the San Jose climate. The dry summers and occasional heavy rain cycles age rubber and bearings faster than a mild coastal climate would. Homes with frequent sliding door use or dusty conditions near hillside lots will see wear on the shorter end of that range. Call (669) 333-7786 if yours have worn out, and we’ll quote the replacement in writing before any work starts.
Most Mr-Glass door problems can be repaired, not replaced. Worn rollers, tired hinges, drift in the frame, and exhausted weatherstripping are all fixable at a fraction of the cost of a new door. Full replacement only makes sense when the glass is broken, the frame is structurally damaged, or the door is old enough that parts are no longer available. We’ll tell you honestly which way to go, because we’d rather keep a good door working than sell you one you don’t need.
A typical Mr-Glass door roller, hinge, or latch job takes 1 to 3 hours on site. Track work or full door realignment can run 2 to 4 hours depending on how much adjustment the frame needs. We schedule a real arrival window, and you’ll get a written price before the job starts. Call (669) 333-7786 to schedule yours.
Yes, our San Jose service trucks carry the most common Mr-Glass-compatible rollers, hinges, strike plates, and weatherstrip profiles. We also stock hardware for PGT, CGI, and CWS doors, and we can order anything uncommon with a short lead time. If you tell us the symptom and send a photo before we arrive, we’ll usually show up with the right part already on hand. Call (669) 333-7786 for your free estimate.
Written by Owen Satterfield, Owner, Westlight Windows San Jose at Westlight Windows San Jose, serving San Jose and nearby areas.
Six Reasons Homeowners Choose Westlight Windows San Jose
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.