New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows San Jose pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Impact Garage Doors: The San Jose Owner’s Guide
We stock and install CGI-compatible impact garage doors throughout San Jose, with most full replacements running $3,400 to $7,800 installed depending on size, series, and track condition. If your current door has a cracked panel, a blown roller, or a bent track from a side impact, we can usually match the part and have it on the truck within a few business days. Most San Jose homeowners discover the problem the hard way: the door binds halfway up, groans at the hinges, or leaves a gap at the bottom that lets in the cold air rolling off the Santa Cruz Mountains.
Which CGI Models This Applies To
CGI’s garage door line in California centers on their impact-rated 6900 and 7200 series, plus the newer 9000 series that started showing up in South Bay homes around 2019. The compatibility gotcha that trips up a lot of San Jose owners: CGI changed the hinge mounting pattern on the 7200 series in 2021, so a hinge that fits a 2018 door will not line up on a 2022 model. The quick way to confirm is the label on the inside of the bottom panel: it lists the series number, panel height, and a manufacture date code. We use that sticker to pin the exact part before we order anything.
The OEM-versus-aftermarket decision matters more for CGI than for most brands. CGI’s Florida-milled panels use a heavier gauge steel than the generic aftermarket panels sold online, and the impact rating on an OEM replacement carries the same testing documentation your insurance company may already have on file. Aftermarket springs and rollers are fine in most cases; aftermarket panels are a gamble we generally do not recommend given what San Jose homeowners invest in wind and debris protection.
Signs Your CGI Impact Garage Doors Is Failing
- Door groans or shudders at around the two-thirds mark going up. This is usually a torsion spring that has lost tension over five to eight years of daily cycles. The spring still works, but it is asking the opener to do the heavy lifting, which burns out the opener motor faster.
- Visible rust bloom around the bottom panel corners. San Jose’s dry summers hide moisture damage, but winter rain against a door that sits in a shaded driveway will creep into the steel. CGI’s galvanized coating is good, not immortal; once rust starts along the seam, the panel is on borrowed time.
- Door sits crooked in the opening, with a wider gap on one side. This points to a failing roller or a hinge that has wallowed out its attachment point. On the 6900 series we see the lower hinge on the right side fail first simply because that is where most people grab the handle.
- Impact rating sticker is peeling off or unreadable. Here is the blunt truth: if the sticker goes, so does the paper trail for your insurance. An unlabeled CGI door is just a steel door as far as a claims adjuster is concerned.
- You feel a draft or see daylight along the bottom edge. The thermoplastic weatherstrip on CGI doors compresses over time, especially on west-facing San Jose garages that bake in the afternoon sun. A flattened strip lets in pollen, dust, and whatever is trying to crawl under the door.
Replacement Cost & What’s Included
Here is how pricing shakes out in San Jose right now. A single-panel replacement on a CGI 6900 series door runs $480 to $900 installed. A full spring replacement on either the 6900 or 7200 runs $340 to $620 for a pair, with the springs themselves typically $140 to $280 of that number. A full door replacement, which is the smarter call when you have two or more panels failing or a track that took a side hit, runs $3,400 to $7,800 installed depending on width, height, series, and whether we are reusing your existing opener rails or running new ones.
Every quote comes in writing before any work starts, same as every window or door we install. That means the number you see is the number you pay: no revised invoice at the end of the day, no “we found additional damage” phone call unless we are standing in your garage showing it to you with the price adjustment on paper.
DIY or Call Us?
What you can safely do yourself: check the model sticker, note which panel or corner is failing, sand and touch up surface rust before it pits, and lubricate the rollers with a silicone-based lube. What you should not touch: the torsion spring. A CGI torsion spring on an impact-rated door carries enough stored tension to break a jaw or take off fingers if the winding bar slips. That is not a scare line; it is the honest reason we ask San Jose homeowners to leave the spring work to a trained tech. One of our guys has been doing this since Owen Satterfield started the company in 2009, and he still treats every spring with the same respect he did on day one.
If you are not sure whether a part is worth replacing or the whole door has run its course, call us and we will walk you through what we would check. The number is (669) 333-7786, and a real person answers.
FAQs
With regular use, a CGI impact garage door in the San Jose climate lasts 15 to 20 years before the panels or track system start showing age, with springs needing replacement every 5 to 8 years. Homes in the eastern foothills that get more sun exposure on the door face tend to see weatherstrip and finish wear about two years earlier than homes in shaded Willow Glen neighborhoods. Call (669) 333-7786 for an exact assessment; estimates are free.
Small dents can sometimes be worked out, and surface rust can be sanded and refinished, but a cracked or bent CGI panel should be replaced because the impact rating is compromised. Once the steel is creased, the structural integrity that earned the wind-load rating is gone. We will tell you honestly whether a repair holds or a replacement is the only real fix, and the evaluation call is free.
Most single-part repairs, like a roller, hinge, or weatherstrip, take 45 to 90 minutes on site. A full spring replacement runs about two hours including setup. A complete door replacement is generally a one-day job, though we always give a committed arrival window so you are not waiting around wondering. Call (669) 333-7786 and we will tell you the realistic timeline for your specific repair.
We keep the most common CGI springs, rollers, hinges, and weatherstripping on our trucks, and we stock replacement panels for the 6900 series at our San Jose yard. Less common parts, especially for the newer 9000 series, usually take three to five business days to arrive from CGI’s distribution center. We will confirm availability before we schedule the work so you are not stuck with an open garage.
Written by Owen Satterfield, Owner, Westlight Windows San Jose at Westlight Windows San Jose, serving San Jose and nearby areas.
Six Reasons Homeowners Choose Westlight Windows San Jose
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.